JK 1 TON Axle Swap Truss - Front Dana 60

Designed specifically to make the 05+ Ford Dana 60 bolt into the front of your Jeep JK/JKU!

When sourcing your Dana 60 Axle for this swap choose the following specs:

• 05-Current Ford Front Dana 60
• F250 or F350 Super Duty
• Single Rear Wheel Truck

Choose from "Truss Only" if running a 3 link, or "Truss with Towers and Johnny Joints" if running upper control arms that connect to the factory axle side upper mounts. 



Towers and Johnny Joints for the upper control arms sit higher than the factory JK axle. Includes 2 x Johnny Joints and 2 x Billet Mounts to accept your upper control arms. Adjustable upper control arms with flex joints are recommended. 

Requires trimming 2" of the casting from the driver side to fit the truss, lower control arm mount and shock mount. 

Due to the extra width of the Dana 60 the lower control arm mounts are wider than the factory JK axle. Adjustable lower control arms with flex joints are recommended. 

If you are running a Front 3 Link or Front Triangulated 4 Link choose "Truss Only" option from the drop down menu, SKU # 2185. Please add 1 or 2 of SKU # 1114 as it makes an excellent upper control arm mount when placed on top of the truss. Shop our other JK 1 TON Swaps today! Also, be sure to check out our other Axle Truss Kit & Axle/Drivetrain products.

Simply tack the truss together on your welding bench, then place it on the axle for final fitment and welding. The brackets will key and fit into slots on the truss for precision alignment and accuracy.  

TRUSS KITS ARE DESIGNED FOR EXPERIENCED WELDERS AND FABRICATORS! NO INSTRUCTIONS ARE PROVIDED. IF YOU CANNOT DETERMINE THE LAYOUT/PLACEMENT OF THE BRACKETS FROM THE SUPPLIED PRODUCT PHOTOS PLEASE DO NOT PURCHASE! 

For ABS you will maintain the Ford Dana 60 unit bearings with 60 tooth tone rings. Simply swap over to Dodge ABS Sensors - Mopar part # 5179958AB or Airtec/Ultra-Power part # 5S8491, then use a programmer to adjust your gear ratio and tire size. Keep in mind the factory Jeep JK tone rings are 52 tooth, so you will have to adjust accordingly.