TMR Customs

Introducing The Grizzly Hole Saw Tube Notcher! The first and last tubing notcher you will buy!

At TMR we’ve been notching tubes and reselling tube notchers for years. We’ve learned many pitfalls and shortcomings of notchers along the way. This has allowed us to develop and manufacture The Grizzly Tube Notcher - guaranteed not to let you down!

The key to tube notching and any metal cutting is rigidity. With a 1-1/4” thick main block, 1” thick swing arm and 1-1/4” heat treated chromoly shaft we guarantee The Grizzly is the most rigid hole saw notcher on the planet.

Why buy The Grizzly over other hole saw tubing notchers?

• Ability to pivot and reach around to notch from both sides of the tube - allowing for up to 240 degrees of notch angle
• 2 clamps allow you to notch on a bend
• Round Tube 3/16" OD Minimum, 2-1/2” OD Maximum capacity
• Square Tube 2”x2” Max capacity
• Flat Bar 2” Max capacity
• Angle Iron 2” Max capacity
• Offset notch up to 2-1/2” via adjustable dovetail block
• Degree Ring with Adjustable Pointer
• Billet aluminum bearing block
• Made in USA self lubricating bronze bearings
• 1-1/4” heat treated, ground and polished, 4140 chromoly shaft
• Main Block is black oxide coated
• Clamps and Degree pointer are powder coated
• Heat treated & replaceable drill attachment - can be used with 3/8” and 1/2” hand drills
• Heat treated and replaceable hole saw attachment - fits 9/16” to 3” diameter hole saws with 1/2”-20 or 5/8”-18 arbor threads
• Can be Vice mounted or fixture mounted using tapped holes in bottom of main block
• Can be mounted directly to a chassis or roll cage to make notch repairs or modifications

Hole saw/saws not included! If you need quality hole saws click here for Starrett brand "Fast Cut"!

Check out our other off-road fabrication and cutting tools today! Shop now!

• CNC laser cut and formed from 3/8" and 1/4" steel
• Universal full hydro ram mount design allows the hydraulic ram to be mounted up high on the face of a truss or down low on the axle tube
• Compatible with all common double ended steering rams
• Perfect complimentary piece to our full width truss kits and double shear high steer arms!

Be sure to check out our other off-road steering parts.
***RAM NOT INCLUDED!***

TMR's Weld Bottle Organizers get your junk up off the bench and neatly organized! Increase your efficiency by knowing exactly where your tools and equipment are stored!

Weld Bottle Organizer - The Whole Shebang has space for welding helmet, 2 coats/jackets, gloves, 2 bottles, weld bottle cap, adjustable wrench, tape measure, brush, welding snips/pliers, sharpies and paint markers. 

Sick of hammering and trying to bend flat bar and round bar over the edge of your vice or bench? TMR's Machete Bender is the fix! It will instantly become the most versatile tool in your fabrication arsenal! 

• CNC machined in house. 
• Powder coated and black oxide coated for outstanding looks and corrosion resistance.
• Bends up to 3/8" steel round bar and up to 1/4" x 1" steel flat bar.
• Designed to be mounted in a bench vise.
• Common uses include exhaust hangers, hooks, custom brackets, fender hangers, modifying existing tabs, etc.
• All dowel pins are 1/2" for max beef!

Dial in perfect 90° angles every time with the TMR Customs 90° Fabrication Square – your new go-to tool for accurate fixturing and repeatable results in the shop or home garage.

Supplied as a flat pack weld-it-yourself kit, our fabrication square is designed to save you money and let you do the fun part at home. The tab and slot design makes for quick, foolproof assembly with excellent precision and alignment.

Crafted from 3/16" thick HRPO steel, this fab square offers outstanding strength and rigidity, making it ideal for welding, metal fabrication, and chassis work. The integrated holes are precision-cut to accept 5/8" and 16mm fixture tooling, giving you full compatibility with your welding table or fixturing setup.

Key Features:

• ✅ DIY Weld-It-Yourself Kit – Flat packed to save on shipping and costs

• ✅ Tab & Slot Design – Quick, accurate self-fixturing assembly

• ✅ 3/16" Thick HRPO Steel – Built tough for real shop abuse

• ✅ Fixture Tooling Compatible – Works with both 5/8" and 16mm tables

• ✅ Perfect for Fabricators & Welders – Ideal for chassis builders, motorsports shops & metalworkers

Whether you’re setting up tubing, plate, or boxed structures—this square helps you work smarter and faster. Skip the guesswork and clamp with confidence.

Upgrade your fabrication game with the TMR 90° Fabrication Square today!

SOLD INDIVIDUALLY, WITH THE OPTION TO UPGRADE TO A PAIR!

When it comes to organizing your shop, race trailer, chase truck, overlander and more TMR Tools has you covered!

TMR's grinding disc organizer provides proper storage for a large assortment of abrasive wheels! Get your grinding wheels up off your welding table where they'll stay clean and ready for use. TMR makes the ultimate grinding wheel holder and storage system!

AVAILABLE IN RAW STEEL OR POWDER COATED ORANGE.

Mount your shocks cleanly and correctly with TMR Customs Axle Tube Shock Brackets – Parallel.

Designed to weld directly to your axle tube, these brackets are perfect for traditional shock, coilover or air shock setups on custom off-road builds, street trucks, rat rods, hot rods, buggies, or solid axle swaps.

✅ Parallel Mounting Design – clean packaging
✅ Built for Standard Shocks, Coilovers, Air Shocks & More – Ideal for high-performance off-road suspension setups
✅ Laser Cut from 1/4" Steel – Heavy-duty construction to handle serious abuse
✅ 1/2" Bolt Hole – Works with most shock hardware, can be drilled larger if needed
✅ Sold in Pairs – Includes 2 shock brackets per order

Whether you're crawling rocks, cruising the strip, or bombing desert trails, these shock brackets offer strength, simplicity, and a clean install every time.

When it comes to organizing your shop, garage, race trailer, chase truck, overlander and more TMR Tools has you covered!

TMR's Daytona/Harbor Freight Jack Stand Storage Racks are what you need to get your jack stands up off the floor and organized onto your wall. Free up valuable floor space! No more digging behind a workbench to find your jack stands are buried under a pile of crap. 

Works with Daytona (Harbor Freight) 3 TON, 6 TON and 12 TON Heavy Duty Ratcheting Jack Stands. Each Rack holds 2 stands (as pictured). 

AVAILABLE IN RAW STEEL OR POWDER COATED ORANGE.

• Precision machined from DOM tubing, drilled and tapped to accept grease fitting
• Our 45 degree chamfered ends allow for more flex and articulation
• Uses high quality replaceable polyurethane bushing
• Includes DOM housing, 2 x bushing halves, bushing sleeve, and grease fitting

When we sat down to come up with a design for our interlocking inner diameter tube clamps/couplers, we thought we could greatly improve upon what already existed. We built a number of unique features into these that sets them apart! At TMR Customs we manufacture the world's best roll cage clamp!

1: Both bolts can be loaded from the same direction! Gone are the days of threading in one fastener from the front side, and one fastener from the back side. Now you can mount our tube clamp extremely close to other components on your chassis without interference issues!

2: Locking feature - we use a nylon lock nut. No need to worry about stripping out the tapped holes in your clamps. The nylock nuts key into the machined pocket, eliminating the need to hold them with a wrench or socket when tightening. 

3: We machined a large 45 degree chamfer along the interlocking edges. This makes it much easier to align the clamps, especially after they have pulled from welding, or the tubes have slightly tweaked from a roll over or crash.

4: We left enough length on the small ID that is inserted into the tube that you can properly plug weld these for additional strength.

CHOOSE FROM THE OPTIONS BELOW TO MATCH THE SIZE OF YOUR TUBING!

Lifetime Heims with BRONZE RACES are best suited for racing and severe duty applications. The solid bronze race is built for maximum strength and durability. 

100% CNC MACHINED AND HAND ASSEMBLED IN-HOUSE FROM FORGED & BILLET MATERIALS

• TRUE quad wrap limit strap for unmatched strength
• Heat-treated 4130 Chromoly strap end tabs ensure no ovaled or elongated holes occur when using (or abusing) your limit straps
• Integrated chafe guard evenly distributes the load for improved strength and longevity
• TMR limit straps only stretch 1" per 12" of the strap. See detailed chart for "stretched length" dimensions!
• Made from 10,000 LB rated nylon webbing. 
• SOLD INDIVIDUALLY!
• Made in USA!
• Be sure to check out our other limit strap products!

• CNC laser cut & formed from 1/8" steel
• 1/4" hole
• 1" from center of bolt hole to bottom of tab 
• Sold individually